Enttec Din Pixie 73539 2-Universe DMX LED Pixel Controller

Control LED pixels with ease

ENTTEC’s DIN Pixie is a robust and reliable installation-grade DMX-to-SPI pixel converter and standalone player designed to make control of LED pixels easy.

Control 2 universes of DMX (256 RGBW, 340 RGB or 1024 White 8-Bit LEDs) from the DIN Pixie. Use its DMX inputs, stream to it from a computer plugged in using USB, or set it to play a 1-universe standalone show you’ve created and saved to internal memory.

Packed with installer-friendly features

Support for multiple LED integrated circuits.

Intuitive configuration enables the device to be heavily tailored to your projects.

Standalone mode allows playback of a pre-recorded sequence with advance control options such as play count, loop delay and play on power up.

Wide input voltage range (5-48V) allowing the device to be powered from the same PSU as your LEDs.

Self-healing fuse with surge protection on every port.

Reverse polarity protection on each SPI data line.

Overtemperature protection.

Internal SPI memory soldered directly to the circuit board (no removable storage to come loose).

Slim, electrically-isolated 4 DIN unit form factor with surface and TS-35 DIN rail mount options.

Use ENTTEC’s free PRO-MANAGER software to test, update and configure your DIN Pixie.

Support for a a wide range of LED strips and dots

Each DIN Pixie can control up to 2 DMX Universes worth of LED pixels:

Pixel Type Quantity

RGBW (8-bit) 256

RGB (8-bit) 340

While (8-bit) 1024

Pixel Type Quantity

RGBW (16-bit) 128

RGB (16-bit) 170

While (16-bit) 512

See the Downloads section for a comprehensive table showing all compatible LED protocols.

Built on trusted technology

The DIN Pixie uses the same rock solid DMX USB technology put ENTTEC on the map over 20 years ago.

The DIN Pixie’s API is uses the same trusted technology and developer API as our original Pixie Driver. Any applications that works with the Pixie Driver will work with the DIN Pixie.

DMX USB icon in a light grey shade.

Standalone show playback from inbuilt flash memory

Some installations don’t have the need for live control. The DIN Pixie allows you to record a show from DMX or Art-Net in Pro Manager to be played back on power up or use it when DMX input isn’t present.

Standalone playback from inbuilt SPI flash memory (4000 frames [approx. 100 seconds of show]).

Play a predefined show, set a blackout instantly or hold the last state if DMX input is lost or unplugged.

Shows can loop for a fixed number of times or infinitely.

Record a show from 1 Universe of Art-Net or a DMX input (using the Pro Manager configuration application).

Export your show to deploy to other DIN Pixies.

Two layers of protection – Engineering you can rely on

The DIN Pixie has been engineered for 24/7 operation. Each individual data port and data line (2 x DMX / USB / 2 x Pixel) features a self-healing fuse and surge protection capable of protecting the device from up to 8kV of contact discharge.

So, what does this mean in practical terms?

If your cabling or power supply has a fault that causes a spike in voltage, a heavy-handed installer gives a static shock, or maybe your DMX lines have a lot of electrical noise on them, the issue won’t be passed through the DIN Pixie to your other equipment. Any short disturbance is suppressed.

Rest assured, your DMX sources, computer and each pixel strip will be protected from any issue that could occur with your pixel wiring and vice-versa.

Polarity-protected data ports

We’re not new to this industry. We know that sometimes accidents happen or faults develop on installations over time. That’s why the DIN Pixie DMX-to-SPI converter has been designed to block power entering each of the pixel data ports in the case of a short circuit or incorrect wiring. Rogue power can’t pass back through the DIN Pixie into your wider installation.