Shure P3TR112GR PSM300 Wireless Stereo Personal Monitor System with SE112-GR Earphones, G20

The Shure P3TR112GR wireless in-ear monitor system is part of Shure’s PSM300 wireless family of systems, and features their SE112 Sound Isolating Earphones. The PSM300 series (a.k.a. PSM 300) is available as both an entry-level system for first-time in-ear monitor users, and as a professional system for rental houses, monitor engineers and musicians needing more advanced options. PSM300 Stereo Personal Monitor Systems provide reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding delivers the clearest sound, with ultra-low noise and no artifacts.

Includes

• P3R Wireless Bodypack Receiver
• P3T Half-Rack Single Channel Wireless Transmitter
• SE112 Single-Driver Sound Isolating Earphones
• Rackmount and harware kits
• ¼-Wave Antenna
• BNC Bulkhead Adapter
• BNC Cable
• Power Supply
• Two (2) AA Batteries
• Zipper Bag
• User Guide

Features

• Includes P3R bodypack receiver, P3T single-channel trasmitter, and SE112 isolating earphones
• Rackmount and hardware kits included
• One-touch frequency scan and sync
• Audio Reference Companding delivers the clearest sound and no artifacts
• Easy to set up and operate for entry-level users

Specifications

• Overall System:
• RF Carrier Range: 488 – 937.5 MHz (Note: varies by region)
• Compatible Freqeuncies Per Band: Up to 15
• Tuning Bandwidth: 24 MHz maximum (Note: varies by region)
• Operating Range: 300 ft (90 m)
• Audio Frequency Response: 38 Hz – 15 kHz
• Signal-to-Noise Ratio: 90 dB (typical)
• Total Harmonic Distortion: < 0.5% (typical) (ref. ±34 kHz deviation @ 1 kHz)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: > 80 dB (typical)
• Frequency Stability: +/- 2.5 ppm
• MPX Pilot Tone: 19 kHz (+/- 1 Hz)
• Modulation: FM, MPX Stereo (ref. +/- 34 kHz deviation @ 1 kHz)
• Operating Temperature: 0° F to 145° F (-18° C to +63° C)
• SE112 Earphones:
• Speaker Type: Single Dynamic MicroDriver
• Sensitivity: 108 dB SPL/mW
• Frequency Range: 25 Hz – 17 kHz
• Cable Style: 50″ Fixed
• Colors: Gray
• P3R Receiver:
• Active RF Sensitivity (at 20 dB SINAD): 2.2 µV
• Image Rejection: > 90 dB
• Adjacent Channel Rejection: > 60 dB
• Intermodulation Attenuation: > 50 dB
• Blocking: > 60 dB
• Audio Output Power (1 kHz @ < 1% distortion, peak power, @ 32 Ohms): 80 mW (per output)
• Minimum Load Impedance: 16 Ohms
• Headphone Output: 1/8″ (3.5 mm) stereo
• Net Weight (without batteries): 3.5 oz. (98 g)
• Dimensions (HxWxD): 4.3″ x 2.5″ x 0.8″ (110 x 64 x 21 mm)
• Battery Life: 5 – 7 hours (continuous use) AA batteries
• P3T Transmitter:
• RF Output Power: 10, 20, 30 mW (Note: varies by region)
• RF Output Impedance: 50 Ohms (typical)
• Net Weight: 27.6 oz. (783 g)
• Dimensions (HxWxD): 1.7″ x 7.8″ x 6.8″ (43 x 198 x 172 mm)
• Power Requirements: 12 – 15 V DC, 260 mA maximum