Audio-Technica AT4041 End-Address Cardioid Condenser Microphone

Audio-Technica AT4041 End-Address Cardioid Condenser Microphone

Audio-Technica AT4041 End-Address Cardioid Condenser Microphone – AT8405a Stand Clamp – AT8159 Windscreen – Protective Carrying Case – Audio-Technica 5 Years Limited Warranty
The Audio-Technica AT4041 Microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.Smooth, extended frequency response with a slight rise occurring in the high-frequency regionIdeal for drum overheads, acoustic guitar, piano, horns and under snareLow-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transferTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsState-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standardsSwitchable hi-pass filter and rugged turned-brass microphone housingTransducerFixed-charge back plate, permanently polarized condenserPolar PatternCardioidFrequency Response20-20,000 HzOpen Circuit Sensitivity-36 dB (15.8 mV), re 1V at 1 PaDynamic Range (Typical)121 dB, 1 kHz at Max SPLSignal-to-Noise Ratio70 dB, 1 kHz at 1 PaMaximum Input Sound Level145 dB SPL, 1 kHz at 1% T.H.D.Power Requirements48V DC, 3.2 mA typicalOutput Impedance100 ohmsOutput ConnectorsIntegral 3-pin XLRM-typeSwitchesFlat, roll-offLow Frequency Roll-Off80 Hz, 12 dB/octaveDimensions (LengthxDiameter)6.28×0.83″ / 159.5×21.08mmWeight4.2oz / 120g