Audix SCX25A Large Diaphragm Condenser Microphone

Audix SCX25A Large Diaphragm Condenser Microphone

Includes:
(1) Audix SCX25-A Microphone
(1) Foam lined Wooden carrying case (CC5)
(1) High quality nylon mic clip adjustable through 180º with a standard 5/8 inch –27 thread (Note: metal adapter also supplied to accommodate European standard threads) (MC1)
(1) Cordura carrying pouch (P1)

DescriptionThe SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shockmounted within an intricate machined brass ring, the SCX25A capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

With a smooth uniform frequency response from 20 Hz – 20 kHz, the SCX25A is very consistent when responding to on and off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. The SCX25A is characterized with a wide cardioid polar pattern which enables the sound engineer the opportunity to blend the sound of the instrument or vocal with the sound of the room. Other features include a one-inch (25 mm) gold vapor capsule, miniaturized electronics, and an extremely small footprint. The SCX25A will handle sound pressure levels in excess of 135 dB and will provide up to 20 dB of ambient noise rejection.

In addition to vocals, the SCX25A is ideally suited to capture acoustic instruments such as piano, guitar, vibes, woodwinds, brass, percussion toys, drum overheads, orchestra and symphony sectionals.

The SCX25A, which is manufactured to exacting standards and tight tolerances, features a precision machined brass body, innovative capsule suspension system, steel mesh grill, black e-coat finish, laser etched model and serial number, Switchcraft® XLR connector, and heavy duty nylon clip.

 Features:    Specifications:

• Innovative design
• Isolated capsule suspension system
• Miniaturized pre-amp
• Extremely small footprint (brass body only 4 inches long)

• Transducer Type: Condenser
• Frequency Response: 20 Hz – 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 Ohms
• Sensitivity: 27 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 14 dB (A weighted)
• Signal to Noise Ratio: 80 dB (ref 1k @ 1 Pascal)
• Power Requirements: 48 – 52v phantom
• Maximum SPL: 135 dB
• Dynamic Range: 121 dB
• Cable/Connector: 3 pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Brass
• Weight: 6 oz/170 grams