Audio Technica ATW-1312 Digital Wireless Dual Handheld System , 2-Day Delivery

Audio-Technica
$779.00
Current Stock:
SKU:
EH-JP7N-L0IB
Weight:
6.35 LBS
Shipping:
$0.00 (Fixed Shipping Cost)

Audio Technica System 10 PRO Dual Digital Wireless Dual Handheld System Product Details:

ATW-1322
ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and ATW-T1002 x2 handheld dynamic unidirectional microphone/transmitter.

Audio-Technica's System 10 PRO rack-mount digital wireless system provides wireless that's so simple to use, so dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it's good to go.

System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48kHz operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.







Features:

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range - completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  • Up to five chassis (ten receiver units) can be linked and used simultaneously
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time & space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

    OVERALL SYSTEM SPECIFICATIONS
  • Operating Frequencies 2.4 GHz ISM band
  • Dynamic Range>109 dB (A-weighted), typical
  • Total Harmonic Distortion<0.05% typical
  • Operating Range 60 m (200') Open range env. with no interfering signals
  • Operating Temperature Range0° C to +40° C (32° F to 104° F)
  • Battery performance may be reduced at very low temperatures
  • Frequency Response20 Hz to 20 kHz
  • Depending on microphone type

    RECEIVER SPECIFICATIONS
  • Receiving System Diversity (frequency/time/space)
  • Output Connectors Remote Receiver Connector: RJ45
  • Link Connector: RJ12
  • Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
  • Dimensions 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
  • Net Weight 940 grams (33.2 oz)
  • Accessory IncludedPower supply
  • Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

    BODY-PACK TRANSMITTER SPECIFICATIONS
  • RF Power Output10 mW
  • Spurious EmissionsFollowing federal and national regulations
  • Input ConnectionsFour-pin Locking Connector
  • Pin 1: GND, Pin 2: INST INPUT,
  • Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
  • Batteries Two 1.5V AA
    not included
  • Battery Life >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Net Weigh 100 grams (3.5 oz) without batteries

    HANDHELD TRANSMITTER SPECIFICATIONS
  • RF Power Output 10 mW
  • Spurious EmissionsFollowing federal and national regulations
  • BatteriesTwo 1.5V AA
    not included
  • Battery Life >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
  • Net Weight 280 grams (9.9 oz)
    without batteries
  • Accessory Included AT8456a Quiet-Flex™ stand clamp