Replacement stylus only for Ortofon/Serato S-120 Cartridge
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
• The best tracking performance for scratching and turntablism • Horizontal tracking ability tops 120 µm • Vinyl wear reduced to an absolute minimum • Absolute flexibility in all settings • Elimination of setup and calibration requirements • Unprecedented level of sound quality
• Output voltage at 1000 Hz, 5 cm/sec.: 10 mV • Channel balance at 1 kHz: 1,5 dB • Channel separation at 1 kHz: 20 dB • Channel separation at 15 kHz: 15 dB • Frequency range at -3 dB: 20-18.000 Hz • Frequency response: 20-18.000 Hz +3 dB/-2dB • Tracking ability at 315 Hz at recommended tracking force: 120 µm • Compliance, dynamic, lateral: 11 µm/mN • Stylus type: Spherical • Stylus tip radius: R 18 µm • Tracking force range: 1,5 - 10,0 g (15 - 100 mN) • Tracking force recommended: 4,0 g (40 mN) • Internal impedance, DC resistance: 1680 Ohm • Internal inductance: 920 mH • Recommended load resistance: 47 kOhm • Recommended load capacitance: 200-600 pF