Ortofon DJ S Replacement Stylus

Current Stock:
0.18 LBS
$0.00 (Fixed Shipping Cost)

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
DJ S is a solid-built cartridge in a new blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied

Output voltage at 1000Hz, 5cm/sec.
6 mV

Channel balance at 1kHz
2 dB

Channel separation at 1kHz
23 dB

Channel separation at 15 kHz
15 dB

Frequency range at -3dB
20-20.000 Hz

Frequency response
20-18.000 Hz 3dB/-2 dB

Tracking ability at 315 Hz at recommmende tracking force
80 μm

Compliance, dynamic lateral
9 μm/m N

Stylus type

Stylus tip radius
R 18 μm

Tracking force range
2,0-4,0 g (20-40 mN)

Tracking force recommended
3,0 g (30 mN)

Tracking angle

Internal impedance, DC resistance
750 Ohm

Internal inductance
450 mH

Recommended load resistance
47 kOhm

Recommended load capacitance
200-600 pF

Cartridge weight
18,5 g

Compatible with cartridges