Hughes & Kettner TubeMeister 36 – 36 Watt Tube Head

The Hughes & Kettner TubeMeister 36 Head guitar amplifier is packed to the brim with tube-tone goodness and a few surprises. Powered by four EL84 power tubes, the 3-channel TubeMeister 36 Head dishes out everything from full, warm clean tones to high-gain leads and crunchy rhythms. You can change the power output of this amp to 36W, 18W, 5W, 1W, or no speaker at all. This is cool because you can set the power on each channel. You can have a fat, clean sound with a full 36 watts of power, the crunch channel can be set to 5 watts so you can dime the master volume for those heavenly overdriven power tubes tones, and then have the lead channel set at 18 watts for a screaming, molten-metal solo tone. Talk about flexible! The integrated Red Box DI gives you big 4 x 12″ cabinet emulation directly to your mixing or recording board. If you want an amp that pretty much does it all, then grab a Hughes & Kettner TubeMeister 36 Head guitar amp and start rockin’ out today!

Features:

3 channels (Crunch, Clean and Lead) Switchable reverb Switchable serial FX loop 2x passive 3-band voicing section tweaked to evoke the best frequency response out Oversized transformers with tons of headroom TSC-protected power amp featuring auto-bias and status LED 5-stage MIDI programmable power soak with silent recording capability Balanced RED BOX OUT with authentic speaker emulation 3 – 12AX7 tubes 4 – EL84 tubes 36W